in

3D Printing Webinar and Occasion Roundup: October 1, 2023 – 3DPrint.com

3D-Printing-Webinar-and-Event-Roundup-October-1-2023.jpg

[ad_1]

Issues are slowing down somewhat this week, however there are nonetheless loads of occasions and webinars to attend within the additive manufacturing {industry}! Stratasys, and 3D Methods proceed their U.S. excursions, whereas BigRep and Strong Print3D are holding an automotive open home, ASTM Worldwide is providing a specialty workshop, and Xometry and HP take a deep dive into MJF 3D printing. There are occasions about medical system, supplies, silicone, and extra, and Materialise will maintain two separate webinars this week. Learn on for all the small print!

3D Printing Information Unpeeled

Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (previously SmarTech Evaluation), provides a information livestream one to 2 occasions every week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Reside and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing {industry} that week, and why they’re vital. Among the tales in his roundup are ones we’ve lined at 3DPrint.com, and a few usually are not, however they’re all equally attention-grabbing and impactful.

October 1 – 4: ASTRO Annual Assembly

In San Diego, California, from October 1-4, the American Society for Radiation Oncology (ASTRO) will maintain its Annual Assembly. This is likely one of the world’s premier radiation oncology scientific occasions, and can have each in-person and digital attendance choices. There will likely be a plenary session, posters, a Product Showcase, eight scientific trial shows, a PRO Program, and a Presidential Symposium. Plus, there will likely be loads of time for networking, particularly within the Exhibit Corridor.

“The assembly theme, “Pay it Ahead: Partnering with Our Sufferers,” is instilled all through the programming. This assembly options a fascinating program with the newest breaking analysis introduced in scientific and training classes together with dynamic networking occasions. Study extra concerning the assembly beneath and make your plans now to join your colleagues.”

You possibly can register for the ASTRO Annual Assembly right here.

October 1 – 4: EuroPM 2023

Additionally from October 1-4, the European Powder Metallurgy Affiliation (EPMA) is holding its annual EuroPM Congress & Exhibition in Lisbon. The occasion is a vital vacation spot for the worldwide powder metallurgy group to satisfy producers, suppliers, and end-users, and be taught concerning the newest improvements. Along with networking alternatives, seminars, and an exhibition, this system will function plenary, keynote, poster, and oral shows, specializing in all facets of PM, from supplies and manufacturing to functions, consolidation applied sciences, and extra. Plus, Kenan Boz, Technical Supervisor at EPMA, instructed me that there will likely be greater than 100 shows about steel AM, “which is form of a report.”

“An anticipated 300 oral and poster papers will outline the newest developments in Powder Metallurgy (PM) over three full days of plenary shows and particular curiosity seminars. As well as there will likely be market critiques from international specialists and workshops on important points.”

You possibly can register for the occasion right here.

October 2 & 4: The Expertise Stratasys Tour Continues

The Expertise Stratasys Tour is taking its cell showroom throughout the U.S., so educators, designers, and producers have a handy option to see the corporate’s newest supplies, 3D printers, and options. This week, the truck is heading to Florida, stopping first in Palm Bay at CAMID – Florida Tech on October 2nd, hosted by TriMech. On the 4th, the tour heads to St. Petersburg Faculty in Clearwater, hosted by TTA.

“Converse with 3D printing consultants from Stratasys and our companions to learn the way your group can profit from 3D printing – whether or not it’s bringing a printer in-house or using additive manufacturing providers from Stratasys Direct. Allow us to present you the way Stratasys is main the worldwide shift to additive manufacturing with progressive 3D printing options for aerospace, automotive, client merchandise and healthcare.”

You possibly can register for the Stratasys Expertise Tour right here. Keep tuned for extra dates and places sooner or later!

October 2 & 5: Würth Additive Group Demo Days

Würth Additive Group continues its 3D Printers within the Wild occasions this week, heading first to Chicago on Monday, October 2nd after which to Boston on Thursday the fifth. This unique occasion sequence, happening at various key places throughout the U.S., will showcase the facility of business 3D printing. Each will cowl 3D scanning and making digital fashions, workflows and software program of reverse engineering, a various array of supplies, digital stock options, and automatic post-processing tools. Plus, when you’ve got a problem for the staff, you may both ship your STL file or CAD design early, or deliver your half to the occasion.

“Industrial 3D Printing ain’t simple, however we take a complete strategy to simplify it for everybody. Come discover ways to make a digital mannequin of a bodily half and print it on demand.”

You possibly can register for the occasion right here.

October 2 – 5: ADIPEC 2023

In Abu Dhabi from October 2-5, ADIPEC 2023 will happen, hosted by ADNOC below the theme “Decarbonising. Sooner. Collectively.” The inclusive, worldwide platform facilitates dialogue throughout the ecosystem, uniting {industry} to hurry up the search, and drive investments, for collective and accountable motion to decarbonize extra rapidly and future-proof our power system. The convention will function over over 350 classes, with greater than 1,600 audio system, targeted on addressing important power and local weather challenges, and 30 nation pavilions, welcoming over 2,200 firms, will showcase the newest power methods and options on the exhibition, which can embrace Roboze, Snowbird Applied sciences, and Spare Elements 3D.

“ADIPEC 2023 locations decarbonisation at its coronary heart, from the cutting-edge convention programme to the progressive exhibition and thrilling new options. Our mission is evident: prioritising decarbonisation throughout the power ecosystem, whereas decreasing emissions and fostering financial progress.”

You possibly can register for the occasion right here.

October 3 – 4: Superior Supplies Present USA

Transferring from the United Arab Emirates again to the U.S., the Superior Supplies Present USA will likely be held in Columbus, Ohio from October 3-4. Co-located with Supplies Science & Expertise (MS&T23), the occasion will showcase the newest in high-performance supplies expertise, together with digital supplies and printed electronics, technical ceramics, graphene, composites, metals, coatings, and extra. Guests can study supplies for a wide range of functions, together with aerospace and protection, automotive, batteries, electronics, power, and semiconductors.

“Leaders in R&D, supplies science and engineering will use the present to supply the newest superior supplies; together with the scientific devices and processing tools essential for the event, manufacture and processing of superior supplies.”

You possibly can register for the present right here.

October 3: Design for Powder Characterization

On Tuesday, October third, Micromeritics, a frontrunner in powder, porous materials, and catalyst characterization, will maintain two classes of a webinar about “Creating a Design Area for Powder Characterization.” Usually, a number of metrics are wanted to supply helpful insights into the habits and characterization of powder, however, as the corporate explains, “massive numbers of seemingly disparate parameters could be complicated and danger obscuring the helpful knowledge inside.” Attendees will hear extra from Dr. Man Stimpson, an Functions Scientist for UK-based Micromeritics firm Freeman Expertise, about this subject.

“Right here we talk about methods to amalgamate knowledge from a number of take a look at procedures in an effort to produce predictive fashions for the collection of candidate powders in manufacturing course of. While the strategy introduced focuses on pill manufacture for the pharmaceutical {industry}, this strategy can be utilized throughout extensive ranging industries in an effort to present helpful take a look at methodologies and clear metrics for powder choice.”

You possibly can register for the 9 am EST session right here, and the 9 am PDT (12 pm EST) session right here.

October 3: Strong Print3D’s BigRep Automotive Open Home

On Tuesday, October third in Coventry, from 10 am till 2 pm BST, Strong Print3D is holding a BigRep Automotive Open Home occasion at Warwick Manufacturing Group (WMG). That is an unique alternative to study quick, correct, and dependable large-scale 3D printing from WMG, BigRep, and Strong Print3D consultants. Attendees will get hands-on with a BigRep Studio G2 and study the remainder of its portfolio, hear about actual automotive consumer circumstances, witness reside 3D printing and take part in interactive product demonstrations, and get a free large-scale half evaluation report when you ship in your information forward of time. Plus, you’ll have the prospect to take a tour of WMG’s industry-leading amenities, together with the Worldwide Manufacturing Centre (IMC), Power Innovation Centre(EIC), and Mechanical Engineering Centre (MEC).

“Distinctive alternative to satisfy with the BigRep and Strong Print3D consultants, obtain a FREE massive scale half evaluation report and tour the WMG amenities!”

You possibly can register for the open home right here.

October 3: Meet Materialise SAM

Additionally on the third, Materialise is holding its first of two webinars of the week: “Meet SAM,” the corporate’s 3D foot scanning app. At 12 pm EST, attendees will hear from three Materialise audio system about methods to use the app and add scans, full an evaluation and create a customized affected person report, why cell scanning is a should for the longer term, and extra.

“Get began with highly effective 3D foot scanning expertise in your iOS system. On this webinar, we illustrate the app’s capabilities in a demo and clarify the way it matches seamlessly into your digital workflow to enhance your apply and the affected person expertise.”

You possibly can register for the webinar right here.

October 4 – 5: ASTM Specialty Workshop on Robotics Manufacturing

Not too long ago, ASTM Worldwide was awarded funding from the ARM Institute to assemble data and develop a roadmap for steering and adoption of superior robotics applied sciences. So collectively, ASTM’s AM CoE and the ARM Institute are holding a specialty workshop on “Discovery & Market Evaluation for Robotics in Manufacturing of Area and Hypersonic Elements.” The in-person workshop, held from October 4-5 at ASTM HQ in Pennsylvania, seeks enter from stakeholders in manufacturing of hypersonic elements, and terrestrial manufacturing of area elements, to develop market intelligence, assess the present state of the {industry}, and lay the muse for future expertise roadmaps.

“The workshop will embrace lively discussions and structured brainstorming classes targeted on the specified future state for one of these manufacturing inside the USA, the present challenges and limitations, the R&D must allow quicker adoption of robotics within the manufacturing course of, and the timelines and motion gadgets to handle the challenges and notice the longer term imaginative and prescient that’s potential.”

You possibly can register to your curiosity for the workshop right here.

October 4 – 5: Silicone Expo USA

The second version of Silicone Expo USA, co-located with the Tape & Useful Movie (TFF) Expo USA, will likely be held in Detroit, Michigan from October 4-5. There will likely be attendees from a wide range of end-user teams, together with client items, textiles, power, aviation, oil & gasoline, agriculture, building, medical, and extra. Some firms you’ve possible heard of within the AM {industry} will likely be exhibiting, like BASF, KraussMaffei, Saint-Gobain, and Wacker, and presentation subjects embrace sustainability, textile silicone developments, automation in AI labs, prosthetic utility of silicone, and silicone 3D printing at ultra-low interfacial rigidity.

“Silicone’s exceptional attributes, together with its flexibility and resistance to moisture, chemical substances, warmth, chilly, and ultraviolet radiation, contribute to the creation of secure, cost-effective, user-friendly, and exceptionally sturdy merchandise. The occasion will attracts attendees from a variety of finish consumer teams, fostering connections and innovation inside the {industry}.”

You possibly can register for the expo right here.

October 5: Additiv Polymers World

Worldwide digital occasion ADDITIV Polymers World, supplied by 3Dnatives and targeted on the position and affect of polymer AM, will likely be held on Thursday, October fifth, from 9 am till 1:30 pm EST. Attendees can have the prospect to discover and be taught all about plastic 3D printing, taking a look at every little thing from materials growth to post-processing, with a number of professional audio system and the principle gamers in polymer manufacturing. There will likely be loads of time for networking, plus workshops on subjects like elements certification and floor ending, and panel discussions about the usage of polymer 3D printing in client items, shifting in the direction of a round economic system with AM, and extra.

“Relating to 3D printing, it’s simple that polymers are one of the crucial vital materials households. However that are appropriate for additive manufacturing? What are the functions? How can elements be licensed?”

You possibly can register for the free occasion right here. 3DPrint.com is a proud sponsor of ADDITIV Polymers World!

October 5: What’s New in Materialise Mimics 26

In its second webinar of the week, Materialise will “Uncover What’s New in Mimics Innovation Suite 26.” At 10 am EST on the fifth, three Materialise consultants will stroll by the principle options and new enhancements, like enhanced scripting, in Mimics 26. Attendees will discover ways to use AI-enabled computerized segmentation for CMF functions, methods to execute duties in fewer clicks and acquire extra workflow management because of consumer interface updates, and extra.

“Expertise extra scalable and efficient personalization with updates in Mimics Innovation Suite.”

You possibly can register for the webinar right here.

October 5: Deep Dive into MJF with HP & Xometry

Additionally at 10 am EST on the fifth, HP Inc.’s Functions Engineering Supervisor Justin Hopkins and Functions Engineer Dustin Kloempken will join Xometry‘s manufacturing consultants Greg Paulsen, Director of Functions Engineering, and Gross sales Engineer Nikolaus Mroncz for a “Deep Dive into HP’s MJF 3D Printing Expertise.” They are going to cowl a number of subjects, together with how Multi Jet Fusion (MJF) works, getting probably the most out of processable supplies, making use of design methods to avoid wasting money and time on 3D printing elements, and extra. Some great benefits of the expertise, together with uncompromised complicated geometries and accelerated innovation cycles, may also be mentioned.

“Enroll now to learn the way to make high-quality closing elements at scale, illustrated with examples of real-life functions. Don’t overlook to additionally submit your questions for the reside Q&A!”

You possibly can register for the webinar right here.

October 5: 3D Printed Medical System Improvements

Talking of HP, it’s becoming a member of with A3D Manufacturing for a webinar on “Unlocking Medical System Improvements with 3D Printing” at 2 pm EST on the fifth. Consultants will share their ideas and information on the fusion of medical gadgets and 3D printing, reshaping the panorama of those gadgets all the way in which from design and prototyping to manufacturing. As attendees will be taught, the ripple results are main, accelerating innovation timelines and enhancing affected person outcomes.

“Seize the second to chart your course forward of the innovation curve inside the medical system discipline. Register now to safe your digital seat to entry an unique perception graciously shared by our consultants, trailblazing the area of 3D printing for medical gadgets.”

You possibly can register for the webinar right here.

October 5: 3D Methods Additive Insights Roadshow

Lastly, 3D Methods continues its Additive Insights Roadshow this week in Bethesda, Maryland. At this cease, attendees can have unique entry to the corporate’s consultants, together with product specialists and engineers. Through the occasion, they may present demonstrations, reply questions, and provide insights into how 3D Methods’ supplies, printers, and software program options can deal with their functions, and empower companies to design, iterate, and manufacture with improved precision, velocity, and effectivity. You possibly can meet the 3D Methods staff from 3-7 pm EST on October fifth on the Rock Backside Restaurant & Brewery.

“Get impressed by real-world success tales and witness firsthand how firms throughout industries have leveraged 3D Methods’ options to speed up their product growth, streamline manufacturing processes, and drive bottom-line outcomes. From aerospace to prototyping to automotive, you’ll see how additive manufacturing is remodeling companies.”

Maintain a watch out for future roadshow dates and places!

Do you’ve got information to share about any future webinars or digital and reside occasions? Please tell us!

Subscribe to Our E-mail Publication

Keep up-to-date on all the newest information from the 3D printing {industry} and obtain data and provides from third celebration distributors.

[ad_2]

Supply hyperlink

What do you think?

Written by TechWithTrends

Leave a Reply

Your email address will not be published. Required fields are marked *

GIPHY App Key not set. Please check settings

Does-the-iPhone-15-Pro-Max-crack-easily-Consumer-Reports.jpg

Does the iPhone 15 Professional Max crack simply? Client Stories says no

Apple-considering-bidding-for-Formula-1-streaming-rights-says-report.jpg

Apple contemplating bidding for Method 1 streaming rights, says report